MDE122 XYZ Flexure Stage:

Configuration:	Right Handed Version
Adjuster Type:	3 High Precision Adjusters (Model MDE216) Utilizing a Patented** Lever System with Rotary Fine and Coarse Control
Stage Travel:	2mm in X, Y, and Z Axes
Resolution:	20nm
Load Capacity:	4.5 kg
Arcuate Displacement:	X axis 20um (at Max. Range of Travel) Y and Z Axes 14um (at Max. Range of Travel)
Optical Axis:	The optical height of all Flexure Stage accessories is 18mm above the top plate.  Therefore,the optical axis height of a mounted accessory is 94mm above the bottom of the stage.

MDE185 Pitch and Yaw Stage:

Configuration:	Right Handed Version
Adjuster Type:	2 High Precision Adjusters (Model MDE216) Utilizing a Patented** Lever System with Rotary Fine and Coarse Control
Range:	θZ (yaw)    Coarse Adjustment    ± 5º                   Fine Adjustment         ± 0.1º
	θY (pitch)   Coarse Adjustment    ± 3 º                   Fine Adjustment         ± 0.1º
Resolution:	θZ (yaw)    Coarse Adjustment    5.5 arc sec.                   Fine Adjustment         <0.1 arc sec.
	θY (pitch)   Coarse Adjustment    5.5 arc sec.                   Fine Adjustment         <0.1 arc sec.
Optical Axis:	When MDE185 is mounted onto an Elliot Gold™ Series XYZ flexure stage, the optical axis height is 125mm above the bottom of the stage.
Cross-Talk:	No Cross-Talk - Rotation in a True Arc.
Visual Indicator:	Swing-Out Pointer Identifies the Center of Rotation

MDE717 Rotation Stage:

Rotation Adjustment:	360°
Coarse Adjustment:	Engraved Scale ±90°, Vernier Reads to 30 Arc Minutes
Fine Adjustment:	Screw with 5 Arc Seconds Resolution
Range:	±5°
Fiber Fixturing:	Fiber Held in Double V-Groove by 2 Clamp Arms
Clamp Load:	Adjustable 26g to 125g
V-Block preset on axis with less than 1um concentricity error
V-Block can be re-centered by user
Standard V-Groove for 125/250um fitted
Split spring sleeve retains fiber in slot at the control end and prevents fouling during rotation