services and solutions at the speed of light

                                   

                      PRODUCTS                                       HOME                                       CONTACT US                                        EVENTS                                        NEWS                          
  • MT 25 Kinematic Mirror Tilting Stage with Piezo Electric Inertial Drive

    •          

              Contact Us for current pricing and lead times.

  •           Specifications:
    •
      • Piezo Driven Step Motor with Low Hysteresis
      • Holds Reached Position without Current
      • Optical Height 11.5mm (on rod)
      • Angular Adjustment 6 deg (+/- 3 deg)
      • For Mirror with Diameter 12.7 mm (w/mirror adapter also for larger mirrors)
      • Free Opening of 9mm
      • Solid Stage Hinges
      • Step Width about 14urad
      • Velocity Up to 25 mrad/s (> 1 deg/s)
      • Also Usable as Prism Stage
      • No Limit Switches Necessary
      • Vacuum Preparation Option
      • Customized Designs Possible
      • Driven by Handheld CN.030.0001 or USB Controller CU.030.xx0x
       

                Technical Data :

              Angular Adjustment:    6 deg (+/- 3 deg)   

              Max. Speed:    25 mrad/s (depending on controller)

              Optical Height:    11.5mm (on rod)

                                         12.5mm (in plate)

              Mirror Mount:    dia. 12.7 mm (1/2 inch)

              Free Opening:    dia. 9mm

              Mass:    46g

              Resolution (calculated)

                  Single Step:     ~14urad

                  1/16th Step:    ~1urad (w/controller CU 30)

                  Half Step:         ~7urad

                  Double Step:    ~28urad (w/controller CN 30)

             

  •           Applications include but are not limited to:
    • Micro/Nano Technology
    • Bio Technology
    • Microscopy
    • Telecommunication
    • Metrology
    • R & D

                      

    •                               

     

    The MT25 Kinematic Mirror Mount provides remote control for tip/tilt adjustment of mirrors.  They can be mounted into standard mirror mounts for manual adjustment and setup, then using computer or pendant control, provide microradian control of laser beams.  In this picture, two MT25s are used for motorized control of a dual trap optical tweezer system.  The MT25 to the left is being manually adjusted into position while the MT25 to the right has been centered and is ready for remote control. These tip tilt stages are great for laser beam stearing.  The linear stages from this product line, the MS30 stages with 20nm resolution, are available for use as laser delay lines.

     

    HOME | PRODUCTS | CONTACT US | EVENTS | NEWS