• Piezo Driven Step Motor with Low Hysteresis
• Holds Reached Position without Current
• Up to 10mm Travel in XYZ
• Full Step Width about 200nm (micro stepping possible)
• Positioning Accuracy Better than 50nm
• Velocity Up to 2.0mm/s
• CNC-Machined Aluminum Body
• No Limit Switches Necessary
• Vacuum Preparation Option
• Customized Designs Possible
• Driven by Handheld CN.030.0001 or USB Controller CU.030.xx0x
 

          Technical Data :

          Travel:  

            MX 25    2mm in XYZ

            MX 35    10mm in XYZ

          Max. Speed:    2.0mm/s (depending on controller)

          Mass:   

            MX 25    46g

            MX 35    75 g

          Load Characteristics

            Mx, My, Mz:    0.15 Nm

            Fx, Fy (jamming force):    <2 N

            Fz (jamming force):    3 N

          Resolution (calculated)

              Single Step:     ~200nm

              1/16th Step:    ~15nm (w/controller CU 30)

              Half Step:         ~100nm

              Double Step:    ~400nm (w/controller CN 30)

          Guidance Accuracy (without load)

              Vertical Deviation:    <2 um

              Lateral Deviation:    <2 um

.

                           MX 25